6 Best Brick Hole Cutters of 2026

When tackling fiber cement siding or stubborn stucco, the PLG2SUPT 4-inch carbide grit hole saw delivers laser-sharp precision and blistering speed that leaves standard hole saws in the dust. Its 80 HRC carbide grit edge isn’t just tough—it’s engineered to slice through abrasive materials up to 50% faster than conventional bits, making it a go-to for contractors battling time on job sites. If you’ve ever wrestled with clogged or dull bits while cutting backer board or Hardy Plank, this tool erases that frustration with clean, continuous cutting and effortless plug ejection.

In real-world testing on fiber cement and drywall stacks, the 1-1/2” cutting depth proved more than adequate for single-pass through most wall assemblies. The included mandrel and dual pilot bits ensure rock-solid stability, minimizing wobble even at high RPMs. It handles plasterboard and air brick installations with ease, but avoid metal or masonry—this isn’t a concrete drill. Without water cooling, extended use on dense stucco can generate heat, slightly accelerating wear. Still, the grit edge maintains sharpness far longer than standard steel when used as directed.

Compared to general-purpose masonry kits like the METOTY 22PCS set, the PLG2SUPT is a specialist, not a jack-of-all-trades—and that’s its strength. It dominates where fiber cement and stucco are the challenge, offering unmatched speed and finish quality. While it lacks versatility for brick or concrete, its focused performance makes it the top pick for siding and exterior remodel crews who need reliability and speed. It outperforms multi-material kits on its target materials with cleaner edges and less operator fatigue, even if it doesn’t offer the size range of bulkier sets.

This 9-piece masonry hole saw kit is a game-changer for pros who demand versatility without sacrificing durability. With tungsten carbide-tipped segments and a rugged steel body, each bit shrugs off the punishment of drilling through brick, concrete, and tile—delivering clean, accurate holes even after repeated use. The 135° pilot drill tip is a standout, offering pinpoint accuracy that prevents wandering and slashes setup time, especially on vertical surfaces. If you’re tired of misaligned conduits or cracked tiles, this kit solves those headaches with surgical precision.

During field testing, the five included diameters—from 30mm to 100mm—covered nearly every common HVAC, plumbing, and electrical penetration need. The SDS Plus and SDS Max shanks ensured seamless compatibility with major rotary hammer brands, and the quick-connect system made bit changes a one-minute affair. Drilling through red brick and cinder block was smooth, though hitting rebar required brief pauses to prevent overheating. For dense concrete, using a water drip significantly extended bit life and improved dust control.

Against single-size competitors like the REKCKRUL 2” kit, this set is the clear winner for multi-job contractors. It trades portability for breadth, offering a full arsenal in one box. While it’s heavier and more complex than budget options, the build quality and range justify the footprint for users tackling varied materials daily. It outclasses smaller kits in flexibility and long-term value, even if occasional DIYers might find it overkill.

For electricians and installers who dread chiseling out junction boxes, the Qivine square hole cutter is a brutally efficient breakthrough—it punches perfect 86-box openings in one pass through brick and concrete. Crafted from heat-treated manganese steel, this tool doesn’t chip or deform, even after repeated impacts in high-density masonry. Its one-step cutting action eliminates the need for sawing and grinding, slashing installation time and reducing dust exposure. If your workflow involves dozens of electrical cutouts, this punch transforms a grueling task into a 10-second operation.

In practical use, the square hole punch delivered crisp, burr-free openings in concrete block and solid brick with minimal hammering. The balanced weight distribution reduced arm fatigue during extended shifts, and the direct-fit design worked flawlessly with standard square-drive rotary hammers—no adapters needed. It handled drywall and wood with equal ease, though softer materials required less force. However, on uneven or cracked masonry, slight misalignment could occur if not carefully positioned.

Compared to round hole saws like the SALI 105mm kit, the Qivine excels in niche precision, not general drilling. It’s not for pipes or vents—this is a dedicated electrical box tool. Yet for that role, it outperforms any rotary solution in speed and finish. While the REKCKRUL or METOTY kits offer broader utility, this punch is unmatched for electricians who value speed, accuracy, and repeatability. It’s a specialized powerhouse that pays for itself in labor savings on commercial jobs.

When you need to blast massive 105mm holes through adobe or cinder block, the SALI 4-1/8” hole saw doesn’t just perform—it dominates with brute-force engineering. Its thicker, sharper tungsten steel blade cuts deeper and lasts longer than standard models, and the high-frequency welded joints ensure the bit won’t fail under pressure. Designed for heavy-duty HVAC and plumbing installs, it powers through brick and steel-reinforced masonry with confidence, even handling 6mm rebar without buckling. If your job calls for large, reliable penetrations, this kit is built for the challenge.

Field tests on adobe and dense brick walls confirmed its deep-cutting capability—the 220mm SDS Plus shank provided excellent reach and stability in tight spaces. The 110mm center drill bit stayed on target without wandering, and the overall rigidity minimized vibration. However, like all large masonry bits, it demands a water-cooled approach on hard materials to prevent overheating and prolong life. Dry drilling on high-compression concrete led to noticeable dulling after just a few holes.

Stacked against the REKCKRUL 2” kit, the SALI is in a different class—bigger, bolder, and built for industrial use. It sacrifices portability and fine control for raw hole-making power. While the METOTY multi-size kit offers more flexibility, this one excels when you need one massive, reliable diameter. It’s the top pick for HVAC techs and plumbers who regularly install ducts or sewer lines and can’t afford bit failure mid-job. It delivers maximum hole size and structural integrity where smaller kits simply can’t compete.

The REKCKRUL 2” concrete hole saw punches above its weight, offering professional-grade performance at a lean price point—making it the smart pick for budget-conscious pros. Its tungsten carbide teeth bite aggressively into brick and hollow block, while the optimized ventilation channels efficiently clear dust, preventing clogs and maintaining drilling speed. The included dust bag is a game-changer for indoor jobs, keeping workspaces cleaner and reducing cleanup time. If you need reliable, no-frills masonry drilling without overspending, this kit delivers.

In real-world HVAC and electrical installations, the 50mm diameter proved ideal for conduit, venting, and pipe sleeves. The SDS Plus shank locked securely into hammer drills, and the center bit stayed true even on vertical concrete walls. Drilling through red brick was smooth, but dense, rebar-laced concrete required intermittent pauses and water cooling to avoid overheating. Without water, the bit showed signs of wear after five continuous holes—manageable for occasional use, but a limitation for heavy daily work.

Compared to the full-featured 9Pcs kit from B0CWMY51HZ, the REKCKRUL is simpler and more focused—it doesn’t offer multiple sizes or SDS Max support, but it’s faster to set up and easier to store. It’s not for large-scale contractors, but for handymen, DIYers, or electricians needing a single, dependable size, it offers outstanding value. It matches pricier kits in core performance on standard materials, just with fewer bells and whistles.

The METOTY 22PCS kit is a complete masonry drilling arsenal—packed with everything you need to tackle any hole from 30mm to 110mm, making it the ultimate multi-size solution for serious contractors. Its tungsten carbide-tipped saws stay sharp through brick, stone, and cement, while the dual SDS Plus and SDS Max rods ensure compatibility across all major hammer drill platforms. The quick-change center drill system is a standout upgrade—no more stuck screws or misalignment—just a secure “click” engagement that saves time and frustration on every job.

During extensive testing, the range of sizes eliminated the need for multiple tool trips, and the 300mm extended rods allowed deep drilling in thick walls without repositioning. The three included dust bags helped maintain visibility and reduce cleanup, though water cooling was still essential for hard concrete. The 110mm bit handled large vent openings with authority, though slower feed rates were needed to manage heat. The only hiccup was the slightly complex assembly guide—but once set, the system ran flawlessly.

Against single-purpose tools like the Qivine square punch or the SALI 105mm bit, the METOTY shines in adaptability and job-site readiness. It’s heavier and pricier than niche tools, but for electricians, plumbers, or HVAC techs juggling diverse tasks, it’s the most future-proof investment. It combines the breadth of the 9Pcs kit with better ergonomics and more accessories, outperforming in both convenience and long-term usability—especially for teams rotating tools across multiple projects.